Oxygen Index Tester
First, the scope of application:
Suitable for the determination of the burning properties of plastics, rubber, fiber, foam, film and film and textile materials
Second, the main technical parameters:
1. Flow meter display
2. Machine accuracy: 2.5
3. Flow adjustment range: 0-10L/min (60-600 L/h)
4. Oxygen input pressure: >0.25Mpa
5. Measurement range: 0 ~ 100% O2;
6. Burning cylinder: inner diameter ≥75mm total 450mm
7. Gas flow rate in the combustion cylinder: 40mm ± 2mm / s
8. Pressure gauge accuracy 2.5
9. Flowmeter: 0-10L/min (60-600 L/h) adjustable
10. Test environment: temperature 10-35 ° C, humidity 45-75%
11. Input pressure: 0.2-0.3MPa
12. Working pressure: nitrogen 0.1-0.15Mpa oxygen 0.1-0.15Mpa
13. Oxygen/nitrogen mixed gas inlet: including pressure regulator, flow regulating valve, gas filter and mixing chamber
14. Sample holders can be used for soft and rigid plastics, textiles, fire doors, etc.
15. Propane (butane) ignition system, flame length 5mm-60mm can be adjusted freely
16. Gas: Industrial grade oxygen/nitrogen (user-supplied).
17. Ignition: There is a metal tube with a nozzle with an inner diameter of Φ2±1mm at the end, which can be inserted into the combustion cylinder to ignite the sample.
18. Self-supporting material sample clip: can be fixed at the axial position of the combustion tube and can clamp the sample vertically
19. Non-self-supporting material sample holder: all stainless steel, can fix the two vertical sides of the sample on the frame at the same time
Third, Working conditions of HC-2 oxygen index meter
1. Ambient temperature: -10 ° C ~ 45 ° C
2. Relative humidity: <85%;
3 Use gas: GB3863 industrial gaseous oxygen; GB3864 industrial gaseous nitrogen; both bottles of gas should be pressure regulating valve;
5. Input pressure: 0.25-0.4Mpa;
6. Working pressure: 0.15Mpa;
Design standard: GB/T 2406-1993
Compliance with standards: ASTM D 2863, ISO 4589-2, NES 714 GB/T 5454 GB/T 10707 GB/T 8924-1988 GB/T 16581-1996 IEC 61144-1992
Fourth, product configuration
1. Host 1
2. Ignition 1
3. Glass tube 2
4. Glass beads 1 bag (into the combustion column)
5. Nylon tube Ф 4 1.2 m (connecting the combustion column to the main unit)
6. Sealing ring Several (already placed on the Ф4 tube)
7. Pointed sample holder 1 set
8. Metal mesh 1 (put into the combustion column)
9. Plastic air outlet plate 1 (already placed in the combustion cylinder)
10. Rubber tube 2
11.M10×1 inner joint screw 1 (within the combustion column)
12.M10×1 joint nut 1 piece (connected to the main unit)
13. Instructions 1 copy
It is a new model developed according to the technical requirements stipulated by the national standard GB/T2406-93. The instrument is used to determine the volume percentage of oxygen required during the combustion of the polymer. The polymer oxygen index value is the oxygen and nitrogen mixed gas stream required to maintain a combustion length of 50 mm or a combustion time of 180 s after the material is ignited. The minimum oxygen concentration (also known as the oxygen index) required to maintain the pattern burning.
The instrument can be used not only as a means to identify the flame retardancy of polymers, but also as a research tool, providing a powerful test method for laboratory research on flame retardant formulations and the development of new flame retardant materials. Suitable for flammability testing of materials such as solid materials, laminates, foams, fabrics, films and films.
Main Specifications
1. Measurement range: 0 ~ 100% / O2;
2. Measurement accuracy: ± 2.5% / O2;
3. Response time: <10s;
4. Output drift: <5%/year;
Instrument working conditions
1. Ambient temperature: -10 ° C ~ 45 ° C
2. Relative humidity: <85%;
3. Use gas: GB3863 industrial gaseous oxygen; GB3864 industrial gaseous nitrogen; both bottles of gas should be pressure regulating valve;
4. Output pressure: 0.25-0.4Mpa;
5. Working pressure: 0.1Mpa;
Product Tags:
|
|
Multi Purpose Flammability Testing Equipment , Accurate Oxygen Index Tester Images
|
